----------------------------------
The following is a news release from Master Bond Inc. You have received it because you are listed as an editor for your publication.
Attached to this email is a low resolution version of the photograph that is included in the press kit for this product.
High resolution versions of this image and files with the body text of this release are available at http://www.masterbond.com/newsrelease/ep76m.
----------------------------------
FOR IMMEDIATE RELEASE
New Two Component Nickel
Conductive Epoxy Adhesive
HACKENSACK, NJ - Feb 8, 2006 -- Master Bond Inc. of Hackensack, New Jersey has developed a new two component, room temperature curing, nickel filled, electrically conductive epoxy adhesive called EP76M. EP76M has a convenient one to one mix ratio by weight or volume. It has a volume resistivity of 5-10 ohm-cm and excellent low outgassing properties. It has a thermal conductivity of 8-9 BTU/in/ft²/hr/°F. EP76M readily develops a tensile shear strength of 2,000 psi when measured and cured at room temperature.
Master Bond EP76M has superior durability, thermal shock and chemical resistance. It exhibits high bond strength to similar and dissimilar substrates. It has a coefficient of thermal expansion of 30 in/inx106/°C. EP76M has a service operating temperature range of -60°F to +250°F. A higher temperature version called EP76MHT can resist up to 400°F.
EP76M is easy to apply. Contact pressure is only required for cure. The adhesive spreads evenly and smoothly. It is 100% reactive and does not contain any diluents or solvents. Cures can be accelerated by the use of heat. Parts A and B are both colored gray. EP76M is available for use in glass jars and metal containers. They are packaged in small and larger sizes (pint and quart units) for convenient application.
CONTACT:
James Brenner, Marketing Manager
Email: jbrenner@masterbond.com
Tel: 201-343-8983
Fax: 201-343-2132
MASTER BOND INC.
154 Hobart Street
Hackensack, NJ 07601-3922
Web: www.masterbond.com
# # #