Expanded Product List

Master Bond Product Search

437 products match

MasterSil 980 Two Part Fluorosilicone Compound MasterSil 980

Two part, fluorosilicone for bonding, sealing, coating. Enhanced chemical resistance. Withstand exposure to gasoline, diesel fuel, motor oil, ethanol. Serviceable from -85°F to +465°F. Cures well in wide and deep sections. Moderate viscosity.
MasterSil 718 Silicone Primer MasterSil Primer 718

Master Sil Primer 718 is a specially formulated silicone primer for use with Master Sil RTV silicone elastomers and sealants to promote adhesion to various difficult-to-bond substrates such as acrylics, ABS, polycarbonates, polyphenylene oxides, polysulfones, polyesters, styrenics, rigid PVC's, etc. It is a one component, low viscosity colorless liquid which can be applied by such methods as brushing, wiping or dipping.
MB250NT One Part Ethyl Cyanoacrylate System MB250NT

Low viscosity ethyl cyanoacrylate. Rapid curing at room temperature; usually sets up within 40 seconds. Passes ISO 10993-5 for cytotoxicity. Resistant to EtO and gamma sterilization. Serviceable from -60°F to +250°F.
MB295 Cyanoacrylate Adhesive MB295

Transparent adhesive. Shore A hardness 85. Bonds well to metals, plastics, glass, rubbers. Fast curing. Viscosity 1,300 to 1,700 cps.
MB297 One Part Ethyl Cyanoacrylate System MB297

Higher viscosity (2,200-2,400 cps) and a slightly longer open time than low viscosity counterparts. High strength, rapid curing ethyl cyanoacrylate system. No heating or mixing needed. Good resistance to cleaning agents. Serviceable from -60°F to +250°F.
One Part Cyanoacrylate MB297FLNT MB297FLNT

Low viscosity ethyl cyanoacrylate. Rapid curing at room temperature; usually sets up within 40 seconds. Passes ISO 10993-5 for cytotoxicity. Resistant to EtO and gamma sterilization. Serviceable from -60°F to +250°F.
MB297Med One Part Ethyl Cyanoacrylate Compound MB297Med

Fast setting. Viscosity 2,000 - 2,400 cps. Biocompatible. Resists EtO and gamma sterilization. Passes USP Class VI testing. Bonds well to metals, plastics, rubbers, glass. Serviceable from -60°F to +250°F.
MB297Med-1 One Part Ethyl Cyanoacrylate Adhesive MB297Med-1

Moderate viscosity 1,000-1,100 cps. Rapid curing. Meets USP Class VI specifications. For disposable and reusable medical devices. Serviceable from -60°F to +250°F.
MB297Med-2 One Part Ethyl Cyanoacrylate Compound MB297Med-2

Fast setting. Low viscosity 100-110 cps. Meets USP Class VI specifications. For disposable and reusable medical devices. Serviceable from -60°F to +250°F.
MB297Med-3 Single Component Ethyl cyanoacrylate MB297Med-3

High bond strength. Rapid fixture time. Ultra low viscosity 10-20 cps. USP Class VI approved. For disposable and reusable medical devices. Serviceable from -60°F to +250°F.

Seiten